Enco M32
28 Hours
Long Battery Life
10-Minute Charge,
20-Hour Listening
IP55 Dust and Water Resistance
10 mm Dynamic Driver
Bluetooth® 5.0
Low-latency
Transmission
Dual-device
Fast Switching
10-minute charge,
20-hour listening ¹
With OPPO's featured flash charging technology, OPPO Enco M32 can provide 20 hours of music playback with just a 10-minute charge. When you're in a hurry to go out, you can quickly charge your headphones and keep up with your fast-paced life.
20 hours music playback
35 minutes
Large Battery,
Long Listening Time ²
OPPO Enco M32 has a large battery to support up to 28 hours of music playback, which means you only need to charge once a week to enjoy music for 4 hours every day. This gives you peace of mind during travel.
28 hours
Long battery life
10 mm
Dynamic Driver
10 mm Dynamic Driver for
Immersive Listening
10 mm titanium-plated composite diaphragm driver delivers powerful, clear, rhythmic, and natural stereo audio, which sounds as clear as if you were at a live performance.
Bass Chamber
Independent Bass
Chamber Design
Pure and Deep Bass
The independent bass chamber enables the dynamic drivers to support a wider frequency range and a larger sound field, as well as greatly reduces sound distortion and refraction. It’s made for purer and deeper bass sound.
HD AAC Codec
CD-quality advanced audio coding (AAC) ensures faithful reproduction of each detail for you to immerse yourself in music.
IP55 Dust and
Water Resistance ³
Enjoy Music Anywhere
OPPO Enco M32 is rated IP55 dust and water resistance. Whether you are sweating it out at the gym or walking in the rain, you can enjoy your music knowing your headphones are safe.
Smart, Seamless Switching
Between Two Devices
You can connect OPPO Enco M32 to your phone for entertainment and switch to your watch while working out. Simply press and hold the volume up and down buttons together for 2 seconds. No re-pair is needed.
Low-latency Transmission,
High-quality Experience
Bluetooth® 5.0 low-latency transmission technology ensures stable and fast connections for smooth calls, videos, and games, so that your listening experience is always optimal.
Automatic Play & Pause
OPPO Enco M32 uses a Hall-effect switch. When you split the headphones, they will automatically pair with a device; when you put them together, the headphones will be instantly powered off and pause audio playback. Audio control is so easy.
Instant Connection ⁴
OPPO Enco M32 can connect to a paired device via Bluetooth® automatically and instantly once powered on.
Feel the Comfort
Designed by OPPO's acoustic ergonomics team, the umbrella-shaped ear tips fit comfortably in the ear canals, and the soft ear wings keep the headphones stably in your ears even when you're working out.
Model | EWN20 |
Color | Black、 Green |
Driver | 10 mm dynamic driver |
Diaphragm | TPU + PET titanium-plated |
Driver sensitivity | 106.5 dB @1kHz |
Frequency response range | 20 Hz- 20 kHz |
Driver impedance | 32 Ohm |
Driver rate power | 5 mW |
Microphone type | Omni-directional MEMS microphone |
Microphone sensitivity | -42 dBV/Pa |
Bluetooth® codec | AAC/SBC |
Bluetooth® version | 5.0 |
Bluetooth® range | 10 m |
Battery type | Rechargeable Li-ion Cell |
Battery capacity | 220 mAh |
Music play time (60% volume) | 28 h |
Charging time | 35 min |
Dust & water resistance | IP55 |
Weight | 26.8 g |
Input | 5V----2A |
Charging port | USB Type-C |
Country of Origin | India |
Remark:
- Endurance test data is based on OPPO laboratory tests conducted at 60% volume. Charging times are based on measurements taken at 25 degrees Celsius in OPPO’s laboratories using the standard OPPO charger. Specific endurance and charging performance will vary based on actual conditions.
- Endurance test data is based on OPPO laboratory tests conducted at 60% volume. Specific endurance performance will vary based on actual conditions.
- The headphones are IP55 dust and water resistant. Avoid using the headphones during strenuous exercise to prevent damage from perspiration.
- OPPO Enco M32 supports quick connection with OPPO ColorOS 11.0+ phones, such as Find X3 Pro, Find X2 Pro, Reno6 5G, Reno6 Pro 5G etc. ColorOS11 "OPPO Wireless Devices" version 3.7.200 or ColorOS12 "Wireless Earphones" version 4.1.100 is required. Other models will be supported after an OTA update (excludes A series, Reno4 SE, Reno2 Z).
- Product images are provided for reference only. Some specifications and details may vary based on changes in suppliers or other extenuating circumstances. Please refer to the actual product in all cases.